Tools for
Woodwork

Lumber and materials / 003

Wood movement calculator

Estimate how much a board expands or contracts across the grain when moisture content changes, by species and grain direction.

01 / Board and conditions

Estimate seasonal movement

Movement is only estimated across the grain. Length change along the grain is small enough to ignore in most furniture work.

02 / Result

Expected change

-1/8 in

The board gets narrower

Width after the change

9 3/8 in (9.352 in)

Species movement rating

T 7.8% / R 5.5%

Average shrinkage, green to oven-dry. Tangential applies to flatsawn faces, radial to quartersawn.

Boards keep moving after you cut them

Wood shrinks and swells across the grain as humidity changes, and the amount differs by species. Enter the board width, the grain direction on the wide face, and the moisture change you expect. The result is the approximate gain or loss in width, which is what joinery, frame and panel construction, and tabletop fasteners have to accommodate.

Flatsawn versus quartersawn

A flatsawn board moves mostly in the tangential direction of the growth rings, which is the larger of the two published shrinkage rates. A quartersawn board moves radially, usually thirty to fifty percent less. The mixed option averages the two for boards where the ring orientation varies across the width. Shrinkage values are species averages from USDA Forest Products Laboratory data, and individual boards vary.

An estimate, not a promise

The math assumes shrinkage scales linearly with moisture change below the fiber saturation point, about 30 percent, which is the standard shop approximation. It will not predict cupping or twist, and it says nothing about length, where movement is usually negligible. To pick realistic moisture values, first find the moisture content your room conditions produce.

Keep going