Workshop reference
Woodworking glossary
Definitions with a practical example, so the word on a drawing means something at the bench.
Board foot
What a board foot is, how lumber dealers use it to price wood and how to calculate board footage from real dimensions.
Read definition
Box joint
How the box joint (finger joint) works, how it compares to dovetails and how to lay out equal fingers.
Read definition
Dado
What a dado is, how it differs from a groove and rabbet and where each cut is used in casework.
Read definition
Dovetail
What a dovetail joint is, how the interlocking tails and pins resist pull-out and where the joint earns its place.
Read definition
Equilibrium moisture content
What equilibrium moisture content means, how temperature and humidity set it and why it controls where lumber ends up.
Read definition
Hardwood and softwood
What hardwood and softwood actually mean, why the names mislead and how to choose between the two groups.
Read definition
Janka hardness
What the Janka hardness test measures, what the number does and does not tell you, and typical values for common species.
Read definition
Kerf
What saw kerf means in woodworking, how it changes a cut list and how to account for it when laying out parts.
Read definition
Moisture content
How wood moisture content is measured and expressed, why it changes after purchase and how it affects a project.
Read definition
Mortise and tenon
How the mortise and tenon joint works, its variations and where it belongs in furniture and framing.
Read definition
Nominal size
Why a 2x4 is not 2 inches by 4 inches, how nominal and dressed lumber dimensions differ and a quick reference for common sizes.
Read definition
Quartersawn
What quartersawn lumber is, how it differs from plainsawn and riftsawn boards and when the cut is worth the cost.
Read definition
Rise and run
What rise and run mean for stairs, ramps and roof pitch and how they define the angle and layout.
Read definition
Specific gravity
What specific gravity means for wood, how it is measured and what it predicts about weight, strength and workability.
Read definition
Spring angle
What a crown molding spring angle is, how it changes the compound miter and how to find it.
Read definition