Box joint, also called a finger joint, is a corner joint made of square, interlocking fingers on both boards. The alternating fingers multiply glue surface along the corner and lock the two boards together, making it a strong, jig-friendly alternative to dovetails.
What it means
Each board gets a row of identical rectangular notches cut so the fingers of one board fill the notches of the other. The fingers are typically cut on a table saw or router with an indexed jig: a key in the jig spaces each cut by exactly one finger width. Because the pattern repeats, the joint is fast and repeatable once set up, which is why it suits production box and drawer work.
Unlike a dovetail, the fingers are not tapered, so the joint does not lock mechanically against pull. Strength comes from the large glue area on the finger cheeks, which is why box joints are usually glued and can be reinforced with pins or splines.
Why it matters
The box joint shines where strength is needed but the look of a dovetail is not: utility boxes, jigs, drawers, beehives and shop storage. It is also far more forgiving to set up than hand-cut dovetails, since the jig's spacing does the precision work.
The layout constraint is real: the board width must divide evenly by finger width, or the joint ends in an ugly partial finger. Choosing the count so the board divides exactly is the first layout step.
Common confusion
- Box joints and dovetails are different joints; the box joint's square fingers do not resist pull-out without glue.
- Finger width and jig key spacing must match exactly or the error compounds down the row.
- The fingers always show on the corner, so the joint reads as a deliberate design detail.
Related tools
The box joint calculator snaps a finger count that divides your board width evenly and gives the exact finger width.