Board foot is the standard unit for measuring hardwood lumber volume in North America. One board foot equals 144 cubic inches, or a piece that is 1 inch thick, 12 inches wide and 12 inches long. Dealers price rough and surfaced hardwood per board foot, so the unit turns mixed stock into a comparable cost.
How it is calculated
Multiply thickness in inches, width in inches and length in feet, then divide by 12. Thickness uses the nominal quartered measure for rough stock, so a board sold as 5/4 counts as 1.25 inches even after it has been surfaced thinner. A 6 inch wide, 8 foot long 4/4 board holds 4 board feet: 1 x 6 x 8 / 12.
For metric dimensions, convert each measurement to inches or feet before using the same formula. The board-foot value itself is a volume, and volume does not change with the units used to describe it.
Why it matters
Hardwood is sold by volume because boards vary in width and length. Two boards with the same board footage can have very different proportions: one wide and short, the other long and narrow. The price is the same, but the parts you can cut from them are not. Board footage tells you what you will pay, not whether a board suits your cut list.
Softwood construction lumber at home centers is usually priced per board instead, by nominal size and length. That is a different convention, and mixing the two causes ordering errors.
Common confusion
- A board foot is a volume unit, not a length. Twelve lineal feet of 1x1 is one board foot only in theory, since no one sells 1x1 hardwood.
- Rough lumber thickness is expressed in quarters of an inch: 4/4, 5/4, 8/4 and so on. Use the quartered number, not the planed thickness.
- Board feet and linear feet are not interchangeable. A linear foot measures length only.
Related tools
Use the board foot calculator to total footage across a cut list, and the lumber cost estimator to turn footage and a supplier price into a budget figure.