Tools for
Woodwork

Lumber and materials / 001

Board foot calculator

Calculate board feet from lumber thickness, width, length and quantity in imperial or metric units. Enter rough or actual dimensions depending on what you need to measure.

01 / Dimensions

Enter your lumber

Fractions, decimals and explicit units are accepted.

Result updates automatically

02 / Total volume

4.00

board feet

Volume for 1 board, before cutting waste or defects.

How to use the calculator

Enter the thickness and width of a board, its length, and the number of identical boards. Choose inches and feet for US lumber sizes, or millimeters for all three dimensions. The result updates as you type. Fractions such as 1 1/2 and 2-3/8 work in either mode, and a measurement with an explicit unit such as 63.5mm overrides the selected unit.

What is a board foot?

A board foot is a volume of 144 cubic inches, equivalent to a board 1 inch thick, 12 inches wide and 12 inches long. It measures volume, not surface area. Hardwood lumber is often priced by board foot, which makes it useful for comparing boards of different widths and lengths.

For imperial dimensions, multiply thickness in inches by width in inches by length in feet, then divide by 12. Multiply by quantity for several identical boards. For example, one board 1 inch thick, 6 inches wide and 8 feet long contains (1 x 6 x 8) / 12 = 4 board feet. Three of those boards contain 12 board feet.

Nominal thickness and real stock

Hardwood thickness is often sold in quarters. 4/4 denotes 1 inch rough-sawn stock, while 8/4 denotes 2 inches. These are nominal purchasing dimensions. If you are estimating the volume of finished, surfaced lumber, enter the actual measured thickness instead. A finished board can be thinner than its rough designation.

The calculator assumes a rectangular board of constant cross section. It does not account for live edges, taper, defects, kerf or waste. Add a separate allowance for your project and check how your supplier measures and bills irregular boards before ordering.

Common questions

Can I enter metric dimensions?

Yes. Select metric and enter thickness, width and length in millimeters. The result is still in board feet so you can compare it with a board-foot price. For example, 25.4 by 152.4 by 2438.4 mm is exactly 4 board feet.

Should I use rough or finished thickness?

Use the dimensions that match your question. For a rough-lumber purchase, use the supplier's quoted nominal thickness. For the physical volume of a finished part, measure the actual board. Do not use a nominal 4/4 thickness to estimate the volume of a surfaced 3/4-inch board.

Does board foot include waste?

No. The result is only the volume of the dimensions entered. Your project may require extra material for defects, grain selection, joinery, cutting losses or mistakes. Determine an allowance based on the actual boards and parts in your plan.

Keep going