Specific gravity is the ratio of a wood's density to the density of water. A species with a specific gravity of 0.55 is about 55 percent as dense as water, so its wood floats; species denser than water, with values above 1.0, sink. For lumber, it is the standard single number describing how heavy the wood is for its size.
What it means
Published values are usually given at a defined basis, such as volume at 12 percent moisture content and weight oven-dry. That convention matters because wood's volume changes with moisture. Two references can report slightly different figures for the same species if they use different bases.
Within a species, specific gravity still varies. Fast-grown plantation stock, old-growth heartwood and sapwood can all differ measurably. Published figures are species averages, so treat them as expectations rather than guarantees for a particular board.
Why it matters
Specific gravity is a useful proxy because so much tracks with density. Heavier species tend to be stronger, stiffer and harder. They weigh more per board foot, which matters for wall-hung cabinets, drawers and anything carried. Dense woods also resist screws and nails more, blunt edges faster and can demand pre-drilling.
The number also drives weight estimates. Multiply specific gravity by the density of water, about 62.4 pounds per cubic foot, then adjust for moisture to get a working weight per volume. That is the basis for most lumber weight calculations.
Common confusion
- Specific gravity is not the same as Janka hardness, though the two correlate. Density, not hardness, defines it.
- A low number does not mean weak for its weight. Balsa is famously strong per pound even though its absolute strength is low.
- The value applies to the species, not the board. Individual pieces run above or below the average.
Related tools
The board weight calculator uses species specific gravity to estimate lumber weight, and species profiles in the wood library list the published averages.