Black cherry (Prunus serotina), often just called cherry, is a premier North American furniture wood. Its warm color, fine texture and forgiving workability have made it a default for cabinets, tables and turned pieces. At about 950 Janka it is moderately hard, sitting between walnut and soft maple in dent resistance.
Appearance and board selection
Freshly cut cherry is pale pinkish brown, but it darkens noticeably with light exposure toward a deeper reddish brown. That color change is the species' defining trait: a tabletop and its leaf, or a cabinet door and its frame, will differ until they age together. Budget time for the wood to reach its mature tone before judging the final color.
Heartwood carries the warm color; sapwood is a contrasting pale yellow that stands out sharply. Many buyers pay extra for all-heart stock, so check sapwood content when comparing prices. Gum streaks and small resin flecks are common and are considered character rather than defects, though heavy flecking can distract on a clean panel.
Working and joinery
Cherry is one of the most pleasant hardwoods to work. It machines cleanly, takes a crisp edge, glues and turns well and rarely fights the tool. The main shop complaint is the same as maple's, burning, so keep cutters sharp and feed steady. It is softer than oak and maple, so it shows handling dents more easily but shapes and carves willingly.
Movement and stability
Radial shrinkage is about 3.7 percent and tangential about 7.1 percent, giving cherry better-than-average stability. It stays flatter than the oaks under normal indoor movement, which is part of why it suits wide panels and fine furniture.
Finishing
Cherry also benefits from sanding a step finer than usual before finishing, since its tight grain shows a smooth surface beautifully and rewards the extra pass.
Cherry's density and fine pores take a silky finish, but like maple it can blotch under penetrating stain. Clear film finishes and oil-based products that let the natural color develop are the common choice. Test finishes on offcuts aged to the same light exposure as the piece, since the color will keep shifting.
Sapwood is the other cost factor. Boards sold as "premium" or all-heart cost meaningfully more than sapwood-containing stock, and a pale streak running through a dark panel is hard to hide. Decide whether your design can use the sapwood deliberately or needs clear heart throughout before comparing prices.
Cost and availability
A premium domestic species. Stock is widely available but prices sit above standard woods, and clear, all-heart, wide boards command more. Read about the data behind these figures on the data sources page.
Uses and hardware notes
Cherry built its reputation on casework and tables where the color aging is part of the appeal, and on turned pieces like bowls, handles and finials where its fine texture takes detail cleanly. It also photographs and finishes well enough that it remains a standard for cabinetry meant to read as fine furniture.
Plan hardware and accents around the mature color, not the fresh-cut pink. Dark bronze and black hardware suit aged cherry; bright brass reads sharper against it. And because the wood darkens fastest in its first months of light exposure, avoid leaving templates or tools sitting on a freshly finished surface, or they will tan a silhouette into the panel.
Similar species
Black walnut is darker and softer, with a different figure and color story. Soft maple is a budget-friendly light-colored substitute but lacks the warmth and aging.