Tools for
Woodwork

Cut and plan / 005

Cut-list templates

Starting cut lists for common projects, grouped by stock size with board-foot totals and a suggested board count.

01 / Template

Start from a proven cut list

Templates are baseline dimensions from common plans. Check angles and joinery against your own design before cutting; only the straight parts are listed.

02 / Cut list

PartStockLengthQty
Back slats1x436 inx5
Seat slats1x422 inx5
Legs2x420 inx2
Arms1x630 inx2
Back supports1x628 inx2
Front apron1x622 inx1
Arm supports1x414 inx2
1x48.8 bf, buy 4 x 8 ft
2x42.2 bf, buy 1 x 8 ft
1x65.8 bf, buy 2 x 8 ft
Total16.8 board feet

Board counts assume cutting everything from one stock length with no waste or defect allowance; buy at least one extra board.

Start from a proven cut list

Every project begins as a pile of rectangles. Pick a template, an Adirondack chair, a picnic table, a workbench, a raised bed or a bookcase, and the generator lists every straight part with its nominal stock size, length and quantity, then totals the board footage per size and suggests how many stock-length boards to buy.

Templates are baselines, not plans

The dimensions come from common published designs and assume standard proportions. A six-foot picnic table seats differently at eight feet, and arm angle on an Adirondack is a matter of taste. Verify the angled cuts, joinery and hardware against the actual design you intend to build; the template only saves you the arithmetic on the straight parts.

From list to lumber pile

Board counts group parts by nominal size and divide total length by the stock length you set, with no waste or defect allowance, so always buy extra. To arrange custom part lengths onto boards directly, use the cut-list planner; to price the pile, the project cost estimator takes the board footage.

Keep going