Tools for
Woodwork

Cut and plan / 006

Fence and deck board calculator

Count pickets and rails for a fence run, or rows and boards for a deck, from dimensions and gap spacing.

01 / Project

Fence or deck boards

Deck boards and pickets share the same pitch math. Posts, gates and hardware are not counted.

02 / To buy

Pickets

17

Rail lumber

24 lin ft

Counts are exact math before defects and miscuts. Buy a few extra boards; lumber that checks or warps mid-project is normal.

Repetitive boards are a pitch problem

Fences and decks are the same math: a run of identical boards spaced by a gap. For a fence, enter the run length, picket width, gap and rail count and get the picket count and lineal rail footage. For a deck, enter the deck dimensions, board width, gap and the board length sold at your yard to get the board count with a waste allowance.

Gaps are not optional

Deck boards need spacing for drainage and seasonal movement, typically 1/8 to 1/4 inch depending on how wet the lumber is. Fence pickets need the same courtesy in humid climates; a tight fence installed in July can buckle by fall. Wet pressure-treated stock shrinks as it dries, so installed-tight boards end up gapped anyway.

What the estimate leaves out

Posts, gates, joists, blocking, fasteners, stain and concrete are all separate line items the counter deliberately ignores. For the money side, the project cost estimator rolls lumber, hardware and sundries into one number.

Keep going