Tools for
Woodwork

Shop math / 003

Fraction calculator

Add and subtract tape-measure fractions, mixed numbers, decimals and metric measurements, with an exact decimal result.

01 / Expression

Add or subtract measurements

Chain additions and subtractions. A hyphen joins a mixed number (2-3/8); a spaced minus subtracts (8 - 1/4). Units such as 63.5mm or 1ft are converted for you.

02 / Result

Nearest 1/16 inch

2 11/16 in

Decimal inches

2.6875 in

Millimeters

68.26 mm

The fraction rounds to the nearest sixteenth. Use the decimal or metric value when a closer tolerance matters.

Shop math without the pencil work

Type a measurement expression such as 2-3/8 + 5/16 or 8 - 1 3/4. The calculator accepts fractions, mixed numbers, decimals, and values with an explicit unit like 63.5mm or 1ft, converting everything to inches before it adds. The result appears as the nearest sixteenth of an inch, an exact decimal, and millimeters.

The hyphen rule

A hyphen with no spaces joins a mixed number: 2-3/8 means two and three-eighths inches. A minus sign with spaces is subtraction: 2 - 3/8 means two minus three-eighths, which is one and five-eighths. This matches how woodworkers actually write measurements, and the page behaves the same way when you copy text from a plan or a cut list.

Check the rounded result

The fractional answer rounds to the nearest 1/16 inch because that is the practical resolution of most tape measures. When the arithmetic produces a value between sixteenths, the decimal and millimeter readings are exact and do not round. For joinery, hinge reveals or machine setups, carry the decimal or metric figure rather than the rounded fraction.

A worked example: 2-3/8 + 5/16 is 2.375 + 0.3125 = 2.6875 inches, which displays as 2 11/16 inches and 68.26 mm. If you need to convert a single measurement rather than combine several, the fraction converter is faster. For adding many part lengths to check a cutting layout, the cut-list planner groups them onto stock boards directly.

Keep going