Tools for
Woodwork

Joinery and geometry / 006

Stair stringer calculator

Divide a total rise into equal risers, lay out treads, and get the stringer length and stair angle.

01 / Stairs

Lay out a stair stringer

Most residential codes cap risers near 7 3/4 in and want treads of at least 10 in, with a comfortable pair summing to about 17 to 18 in. Local code wins.

02 / Layout

Risers / riser height

13 x 7 9/16 in

Treads / total run

12 x 10 in, run 120 in

Stringer length / stair angle

154 15/16 in at 37.0 deg

The 2 x riser + tread rule lands in the comfortable 24 to 26 in range.

Equal risers are the whole trick

Stairs are safe because every step is identical. Enter the total rise from floor to floor, a target riser height and a tread depth and the calculator picks the nearest whole number of risers, then returns the exact riser height, tread count, total run, stringer length and stair angle.

The comfort checks

Most residential codes cap risers near 7 3/4 in and want treads of at least 10 in, and a riser plus tread pair of about 17 to 18 in feels natural to climb. The result flags the classic 2 x riser + tread rule, which lands in the comfortable range between 24 and 26 in. Always check local code before building.

Cut the first stringer as a pattern

Treads number one fewer than risers because the top step is the floor itself. Lay out the stringer with a framing square and stair gauges, allow for tread thickness at the bottom step, then trace the finished stringer to cut the rest.

Keep going