Tools for
Woodwork

Shop math / 007

Shop layout planner

Check whether machines fit a shop footprint with a simple floor plan, placed area and open floor estimate.

01 / Room and kit

Will the machines fit

Footprints are rough machine-and-stand sizes in feet. The planner packs them in rows; this checks fit, not workflow.

02 / Floor plan

Table sawJointerWorkbench
Open floor435 sq ft
Machines placed3 (45 sq ft)

A rough fit check only. Real layouts need clearance for outfeed, dust hose runs, electrical and safe working space around each machine.

Fit before workflow

This planner answers one narrow question: does the kit physically fit the room. Enter the room dimensions and list each machine with its footprint in feet, and the planner packs them into rows and draws the result. Use it to check that a shop list is plausible before worrying about workflow.

What it does not model

A real shop layout is about clearances, not footprints: a table saw needs roughly 8 ft of infeed and outfeed, a jointer needs the length of the longest board, and dust hose runs and electrical drops all claim space. Treat any plan that shows more than about half the floor covered as a red flag for actual use.

Iterate on paper anyway

The row-packing is deliberately simple: it fills the room like stock on shelves and reports what overflowed. Move machines in the list to reorder the plan, then take the survivors to graph paper or a room planner with real clearances. For duct runs, the dust collection calculator sizes each drop.

Keep going